TesCar
Established in 1976 in Osimo, Italy. Focusing on the construction of hydraulic drilling rigs for micropiles and soil investigation, TesCar developed machines that are adaptable and can be configured to complement any specific work environment. TesCar has since evolved to become a leader in the production and sale of small/medium sized piling machines through continuous research and understanding the needs of its customers. Specializing in compact foundation equipment, drilling attachments and drilling tools, TesCar offers a wide range of machines and equipment to meet almost any project need.
Caisson Consultants Inc. is the only authorized dealer in Canada for TesCar!
CF1
The hydraulic piling rig CF1 is equipped with a short locking kelly bar which grant it to reach 8m deep working even under 2500mm. With a max undercarriage width of 1300mm (in working mode), reduceable to just 1000mm in transport mode, the CF1 can move in very narrow places and restricted areas.
CF2
The CF2 hydraulic piling rig is equipped with a short locking kelly bar which grant it to reach 12m deep working even under 2800mm. With a max undercarriage width of 1550mm, the CF2 can move in very narrow places and restricted areas.
CF2.5
The CF2.5 hydraulic piling rig is equipped with a special mast divided into two telescopic sections to reach the minimum working position of 3500mm. With a standard locking kelly bar for a depth of 15m, working under 5200mm and a minimum undercarriage width of 1950mm, the CF2.5 can move in very narrow places and limited areas.
CF2.5 PLUS
The CF2.5 PLUS is equipped with a special mast divided into two telescopic sections with counter-slide device to lower the mast group down the ground and reach the minimum working position of 2800mm. With a standard locking kelly bar for a depth of 15m, working under 3000mm. The mast can be provided with a third element that allows the use of a 20m locking kelly bar, working at a maximum height of 6300mm. With a minimum undercarriage width of 1920mm, the CF2.5 PLUS can move in very narrow places and limited areas.
CF2.5 COMPACT
The CH2.5 Compact hydraulic piling rig come with a with radio remote controller to be operated at a safety distance in case of particularly dangerous working conditions. The power pack is independent and removable to be placed outside buildings without suitable air flow to guarantee the safety of the operator. The CF2.5 COMPACT is also provided with a special "counter-slide" device to lower the mast group to achieve the lowest headroom working position. It's also equipped with a 2 sections telescopic mast to work with a 15 or 18 m locking kelly bar, with the possibility to close down the 2 telescopic sections to reduce the total height and work in low headroom position even under 2400mm with a special "short" kelly bar for 5 m depth. With a max width of 1550 mm, the CF2.5 COMPACT can move in the narrowest places and restricted areas.
CF3 S
The CF3 S hydraulic piling rig is equipped with a special mast divided into 3 telescopic sections to work at different heights and reach the minimum working position of 3500mm. It is provided with a rack-locking kelly bar for a maximum working depth of 22m with the mast fully extended, or 10m with the mast closed down. With a minimum width of 2320mm, the CF3S can move in very tight places and in areas with limited access.
CF3 S PLUS
Equipped with a special tower divided into 3 telescopic sections with a counter-slide device to lower the tower unit to the ground and reach the minimum working position of 3000mm. The CF3S PLUS is equipped with a rack and pinion locking kelly bar for a working depth of 23m with the tower totally raised or 8m with the tower totally lowered working. With a minimum undercarriage width of 2320mm, the CF3S PLUS can move in very tight locations and limited access areas. The undercarriage is equipped with rubber tracks for easy work on any surface.
CF4
Provided with parallelogram to get more clearance under the rotary and have more reach to drill farer from the base unit. The CF4 can be also equipped with expanding tracks to improve the stability in whatever working position (especially when equipped in CFA mode for 12m depth). Moreover the excavator base Eurocomach ESP100 UR4 is provided with an overboost engine and a dedicated hydraulic plant which allows the new CF4 to fit a new rotary with double motors that exploits a torque of 45 kNm. The length of the mast permits to work with a 28m locking kelly bar, with the possibility to remove the upper mast section to reduce the total height and work in low headroom position under 6 m with a special "short" kelly bar for 15 m depth. With a max width of 2320 mm (in transport position), the CF4 can move in narrow places and restricted areas without problems.
CF6
The CF6 Hydraulic Piling Rig is provided with a 2-section mast to work with a 32 m locking kelly bar, with the possibility to remove the upper mast section to reduce the total height and work in low headroom position under 7500 mm with a special "short" kelly bar for 18 m depth.
CF8
Provided with a 2 sections mast to work with a 35 m locking kelly bar, with the possibility to remove the upper mast section to reduce the total height and work in low headroom position under 8000 mm with a special "short" kelly bar for 18 m depth. Powerful, Versatile and Reliable, the CF8 is the new bet of TES CAR to let its customer face the jobsites with hard ground which require a certain torque but also with limited access and low headroom.
TT5
Stats
TORQUE50 kNm
ENGINE POWER53,7 kW
MAX DEPTH28 m
MAX DIAMETER1100 mm
TOTAL WEIGHT
15,5 t
TT7
Stats
TORQUE70 kNm
ENGINE POWER78,5 kW
MAX DEPTH30 m
MAX DIAMETER1500 mm
TOTAL WEIGHT
24 t
TT9
Stats
TORQUE90 kNm
ENGINE POWER86 kW
MAX DEPTH36 m
MAX DIAMETER1500 mm
TOTAL WEIGHT
27 t