Simco 2800 HSHT Drill Rig Stock # ST-058

Untitled design (31)
Untitled design (33)Untitled design (34)Untitled design (35)
Condition Used
Year 1989
Engine Wisconsin VG4D gas deck engine - Serial#: 6231918

Details

Condition Used
Category Used
Make
Year 1989
Engine Wisconsin VG4D gas deck engine - Serial#: 6231918

Description

  • 1989 Simco 2800 HSHT Drill Rig
  • Drill Serial #: 891210
  • 8805 hours
  • Cathead
  • Wisconsin VG4D gas deck engine – Serial#: 6231918
  • 4×3 Centrifugal mud pump powered by Deutz F4L921 diesel engine (1853 hours) – Serial#: 7617580
  • Mounted on a 1999 GMC Sierra K3500 Truck – 4×4
  • 454 Gas 7.4L engine with 182,638 miles
  • Rig has 10’ ft stroke
  • Single speed 1500 ft. lbs. and 125 Rpm top head
  • Previously drilled at 200ft plus used for geothermal boreholes
  • Drill Tooling & Pipe Package details (items included in a package deal)
    • Quantity             Item 
      • 1  Hydraulic Cathead for Mobile Drill / Acker / Diedrich / AMS and other Core / Auger / SPT  drilling rigs. Purchased as good used but have not tested it, however it does turn nice and smooth when checked by hand
      • 2  New (old stock) 140# Soil Penetration Test Hammer / SPT Safety hammer NWJ CONN BOLT TYPE
      • 1   CME 130 lb cathead operated geotechnical slide hammer with hemp rope
      • 5   24-inch split spoons
      • 1   AWJ Hoisting Ring
      • 22  AWJ Drill Rod – 5-ft
      • 1          AWJ Lifting Plug – Elevator
      • 1          Lifting hook
      • 31        NWJ Drill Rods – 10-ft
      • 1          NWJ Drill Rod – 5-ft
      • 1          NWJ Drill Rod – 2-ft
      • 1          NWJ Drill Rod – 1-ft
      • 1          NWJ 5-ft Plug Popper
      • 1          NWJ x 2-4-in taper tap
      • 1          NWJ Lifting Ring
      • 2          NWJ Lifting Plug – Elevator
      • 1          NWJ x 3-1/2 API Reg Sub
      • 1          NWJ x AWJ Sub (box x box)
      • 1          NWJ x AWJ Sub (box x pin)
      • 1          NWJ x 2-7/8 API Reg Sub
      • 1          NWJ x 3-1/2 API Reg Sub
      • 1          NWJ x 2-3/8 Mayhew Jr. Sub
      • 1          NWJ x 2-3/8 API Reg Sub
      • 1          Simco Flange x NWJ (Pin down)
      • 1          9-inch, 3-wing step bit (NWJ box)
      • 1          5-inch, 4-wing step bit (NWJ box)
      • 1          3-1/2 roller cone x NW Pin
      • 88        2-3/8 Mayhew Jr. x 10-ft drill rod
      • 3          Simco Flange x 2-3/8 Mayhew Jr. Saver Sub
      • 1          2-3/8 Mayhew Jr x 3-1/2 API Reg Sub
      • 1          2-3/8 Mayhew Jr x 2-7/8 API Reg Sub
      • 2          2-3/8 Mayhew Jr x 2-3/8 API Reg
      • 1          2-3/8 Mayhew Jr x NWJ Sub
      • 1          2-3/8 Mayhew Jr x 2-inch taper tap
      • 3          2-3/8 Mayhew Jr Flats Wrench
      • 1          2-3/8 Mayhew Jr Saver Sub
      • 1          2-3/8 Mayhew Jr Murphy Fast Plug
      • 2          New Unused (old stock) NQ core lifters with cases for NV Barrels
      • 7 NEW (old stock) Core lifter cases (HQ?; ID opposite of the threads is 2-5/8″)
      • 2 New (old stock) STOP RINGs for Core Barrel (Core Lifters HWL stop rings 12-21-532)
      • 1          New (old stock) HWL Series 6 Diamond Core Drilling Bit
      • 3          New (old stock) NWG Series 6 Diamond Core Drilling Bit
      • 2          New (old stock) NWL Series 6 Diamond Core Drilling Bit
      • 2          New (old stock) CORE LIFTER
      • 10        New (old stock) Kuvawala 16-03-032 NWL Core Lifter
      • 24        New (old stock) NWL Core Lifter Case (1950000) NV Conventional Core Barrel Assembly, NWL V-Latch Core Barrel Assembly, or NWL Spring Latch Core Barrel Assembly
      • 13        New (old stock) Kuvawala 1950000 NWL Core Lifter Case for NV Conventional Core Barrel Assembly, NWL V-Latch Core Barrel Assembly, or NWL Spring Latch Core Barrel Assembly
      • 2          New (old stock) 1800016 CORE LIFTER, FLUTED for HWL Spring Latch Core Barrel or HV Conventional Core Barrel Assembly
      • 5          New (old stock) HQ CORE LIFTER CASES FOR HV OR HWL BARRELS
      • 1          New (old stock) NQ Reaming Shell for NV Double-Tube Core Barrel (NWL or NWG Diamond)
      • 3          New (old stock) 3″ HQ Bit for HV Core Barrel (HWL Series 6 Core Bit (12-HQ–6-WC).
      • 1          New Unused (old stock) NWG Single Tube Reaming Shell for Core Barrel
      • 11        New Unused (old stock) HQ R/S P-Type HWL Diamond Reaming Shell 12-HQRS-P (New / Old Stock) HQ reaming shell for conventional HV core barrel
      • 2          New Unused (old stock) HQ Diamond Reaming Shell For NV core barrel (NWL or NWG Diamond)
      • 2          New Unused (old stock) NQ NWG S/T R/S Reaming Shell Silver is NQ reaming shell for NV core barrel and copper shell is NWG for NWG single tube core barrel
      • 6          New Unused (old stock) HV Conventional Core Barrel with NWJ Connection Approximately 108″ Long (See pictures for accurate measurements or contact us for any additional details required)
      • 1          New Unused (old stock) NV Core Barrel Approximately 104″ Length see pictures for accurate measurements or contact us for any additional details required
      • 1          New Unused (old stock) NV Core Barrel, Complete, with NWJ Connection, 65″ Long see pictures for accurate measurements or contact us for any additional details required
      • 4          New Unused (old stock) NV Core Barrel Complete with NWJ Connection Approximately 6’ Long
      • 2          New Unused (old stock) NV Core Barrel, Complete, with NWJ Connection, Approximately 86″ Long See pictures for accurate measurements or contact us for any additional details required
      • 1          New Unused (old stock) NV Core Barrel Complete with NWJ Connection Approximately 89″ Long See pictures for accurate measurements or contact us for any additional details required
      • 2          New Unused (old stock) NV Single Tube Core Barrel Complete with NWJ Connection Approximately 43″ Long See pictures for accurate measurements or contact us for any additional details required
      • 2          New Unused (old stock) NV Single Tube Core Barrel, Complete, with NWJ Connection Approximately 62″ Long See pictures for accurate measurements or contact us for any additional details required
      • 2          New Unused (old stock) NWG Tube Outer Core Barrel Wrench
      • 4          New Unused (old stock) HWL Outer Core Barrel Wrench
      • 2          New Unused (old stock) HWL Tube Inner Core Barrel Wrench – 12-21-461
      • 4          New Unused (old stock) HV Core Barrel with NWJ Connection Approx 69″ Length
      • 1          New Unused (old stock) HV Core Barrel with NWJ Connection, Approx 108″ Length
      • 14        New Unused (old stock) Well Casing 4-½” od x .237 wall api thread and couple 40″ inches long -0169  05-14 PSL1 HFW TESTED
      • 2          New Unused (old stock) NWL Outer Core Barrel Wrench
      • 2          New Unused (old stock) NWL Inner Core Barrel Wrench
      • 15        New Unused (old stock) NEW – NWJ Drill Rods .250 x 5′ ft SIZE OF DRILL ROD / NWJ Outside Diameter: 2-5/8″ Wall Thickness: 3/16″ Bore OF Coupling/Pin: 1-1/8″ No. Threads Per Inch: 4 Made in USA
  • Available for SALE. Contact for further information and pricing.
  • Located in Mifflinburg Pennsylvania USA